4 Ways to Clean a White Converse

Table of contents:

4 Ways to Clean a White Converse
4 Ways to Clean a White Converse

Video: 4 Ways to Clean a White Converse

Video: 4 Ways to Clean a White Converse
Video: How to Clean White Converse 2024, March
Anonim

White converse shoes are great when new, but they quickly get dirty and stained. Cleaning them is easy enough, but keeping them clean is another story.

Steps

Method 1 of 4: Cleaning with Baking Soda and Vinegar

Image
Image

Step 1. Remove the shoelace

This is important so that you can clean as carefully as possible.

You can clean the laces separately by soaking them in a bucket of warm soapy water, but be aware that they will never be as clean as they used to. An alternative is to exchange your old shoelaces for new ones

Image
Image

Step 2. Wash your shoes under running water

Use cold water for cleaning. You can place them under the faucet or in a bucket of water.

  • To avoid stains and discoloration, don't use hot water, or you could ruin your sneakers.
  • You can use your sink throughout, or line a counter with a sheet of parchment paper or plastic. Dirt and cleaning products can stain the counter and floor, so it's best to avoid excessive dripping.
Image
Image

Step 3. Make a paste of baking soda and vinegar

Mix a lot of baking soda and white vinegar in a glass or plastic container to form a fine, frothy paste.

  • Do not use a metal bowl or spoon. Metal can react negatively to vinegar.
  • You can also use washing powder instead of baking soda, or liquid soap instead of vinegar, depending on what's available in your home. The mixture will not be as powerful, but it will still be effective.
  • The paste should have approximately two parts baking soda and three parts vinegar. As a general rule, use just enough for a pasty consistency.
Image
Image

Step 4. Use the paste on your shoes

Scrub with your nails or with a toothbrush. Scrub the surface of the shoe using the same brush, clean on all sides and put more effort into particularly dirty areas.

When finished, wash the shoes again with cold water. This is not strictly necessary, but you can check your progress and avoid leftover baking soda or vinegar in your washing machine

Clean White Converse Step 5
Clean White Converse Step 5

Step 5. Throw your sneakers into the washing machine

Use the same washing powder you use on a daily basis. Use cold water and program your machine for a complete wash cycle.

  • Do not use a washing powder or chlorine bleach.
  • To prevent shoes from damaging the washing machine, wrap them in fabric before putting them on for washing.
Clean White Converse Step 6
Clean White Converse Step 6

Step 6. Let your shoes dry

Just put them on the clothesline and let the wind do its part. To speed up the process and further enhance the whitening effect, place your shoes in a warm, sunny place.

  • The heat from the sun can dry your sneakers faster, and sunlight also has a slight whitening effect.
  • Do not use a dryer. This type of drying can make your shoes look out of shape.

Method 2 of 4: Different Spot Removal Options

Image
Image

Step 1. Use soap and water

Usually, you won't need anything more than that to remove some blemishes.

  • Use a mild soap, free from fragrances or chemicals. Mix a few drops in a glass of warm water and stir until bubbles form on the surface.
  • To remove stains, rub in firm, circular motions.
Image
Image

Step 2. Try the WD-40

Spray some WD-40 directly onto the shoe marks and scrub with a sponge or cloth.

Among other things, WD-40 is often used to extract moisture and clean dirt residue from various surfaces. Use this product only on the rubberized part of the shoe. As an oil-based product, WD-40 can leave stains on a material such as canvas

Image
Image

Step 3. Apply nail polish remover

Wet a cotton ball with this product and try to remove stains from your sneakers.

  • Rub the stain vigorously to get rid of it. The mark should disappear almost instantly.
  • Acetone-based nail polish removers work best.
Image
Image

Step 4. Use bleach

Dilute a small amount of bleach with water. Use a toothbrush to scrub shoes with this solution.

Bleach is a known bleach, but also an abrasive chemical. Avoid overeating, or you'll damage your sneakers. Use it only on the rubberized parts of the shoe, not the canvas part

Image
Image

Step 5. Clean scratched parts with a whitening toothpaste

Apply the paste directly to the spot, and use a toothbrush to scrub.

  • Toothpastes containing baking soda are the best choice here. Baking soda has additional benefits such as a mild abrasive and cleanser.
  • If you can't find a baking soda toothpaste, other types of whitening agents may also work.
Image
Image

Step 6. Use lemon

Cut a lemon in half and apply it directly to the shoe. Rub vigorously to remove stain.

  • Lemon juice is used as a natural alternative to whitening.
  • Let the lemon juice work for about 15-20 minutes before rinsing it off with cold water.
  • If you don't have whole lemons, you can also scrub the stain with lemon juice and a cloth or brush.
Image
Image

Step 7. Apply Vaseline

Rub Vaseline over the stain or scratch. Leave on for 5 minutes before wiping with a damp cloth.

  • Vaseline can attach to dirt particles, removing them.
  • If possible, use Vaseline only to clean the rubberized part of the shoe. This product may slightly stain the fabric.
Image
Image

Step 8. Scrub the scratches with isopropyl alcohol

Use a cotton ball to apply it to blemishes and scratches. When finished, rub the shoes well with a damp cloth.

Alcohol is a very strong substance that can remove many types of dirt particles

Method 3 of 4: Using a Cleaning Sponge

Image
Image

Step 1. Remove the shoelace

To clean your sneakers as carefully as possible, this is very important.

You can clean the laces separately by dipping them in a bucket of warm soapy water, but they will never turn as white as they used to. An alternative is to exchange your old shoelaces for new ones

Image
Image

Step 2. Moisten your sneakers with cold water

For this you can use a faucet or a bucket of water.

You can also dampen the cleaning sponge, but doing this with your sneakers ensures that there will be plenty of moisture throughout the process

Image
Image

Step 3. Use the cleaning sponge

Gently rub it all over the shoe, cleaning it as extensively as possible.

  • When one part of the sponge gets too dirty, use another.
  • Cleaning sponges don't use any chemicals, which makes them an especially good option if you have pets or children at home, or simply want no chemicals in your home.
  • These sponges contain the melamine polymer. They look flexible and soft to the touch, but it's a really effective abrasive foam. When you use this sponge, you scrape dirt off the shoe using physical force.
Clean White Converse Step 18
Clean White Converse Step 18

Step 4. Let the shoes dry

Put it in a warm, sunny place. This speeds up the process and increases the whitening effect.

  • The heat from the sun can dry your sneakers faster, and sunlight also has a slight whitening effect.
  • Do not use a dryer. This type of drying can make your shoes look out of shape.

Method 4 of 4: Topical Cleaning

Image
Image

Step 1. Remove the shoelace

This allows you to clean as carefully as possible.

You can clean the laces separately by dipping them in a bucket of warm soapy water, but be aware that they will never be as clean as they were. An alternative is to exchange your old shoelaces for new ones

Image
Image

Step 2. Apply a stain remover to the dirty spots

Do this on any dirt spots you wish to remove. Follow the manufacturer's instructions when using your chosen cleaning product.

  • Note that it is not necessary to pre-wet the shoe in this method, unless the label specifies this. If so, follow the instructions provided to determine how much water will be needed.
  • Although the specific instructions may vary, generally, the central idea is to rub the moistened tip of the stain remover onto your sneaker in firm, circular motions. Take care to prevent the stain from spreading across the clean part of the shoe.
Image
Image

Step 3. Throw your shoes in the washing machine

Put your white Converse shoes in the washing machine along with some washing powder. Use cold water and program your machine for a complete wash cycle.

  • Do not use a washing powder or chlorine bleach.
  • To protect your washing machine from damage from sneakers, wrap a fabric around the shoe before putting it out to wash.
Clean White Converse Step 22
Clean White Converse Step 22

Step 4. Let your shoes dry

Just put them on the clothesline and let the wind do its part. To speed up the process and further enhance the whitening effect, place your shoes in a warm, sunny place.

  • The heat from the sun can dry your sneakers faster, and sunlight also has a slight whitening effect.
  • Do not use a dryer. This type of drying can make your shoes look out of shape.

Recommended: