8 Ways to Fold Cloth Diapers

Table of contents:

8 Ways to Fold Cloth Diapers
8 Ways to Fold Cloth Diapers
Anonim

There are many simple and effective ways to fold a cloth diaper: you can form a rectangle, a triangle, a kind of envelope and various other geometric shapes. You have complete freedom to choose whichever you like, as long as you follow the steps below - and be careful with the pins!

Steps

Method 1 of 4: Folding the diaper into a rectangle

Fold a Cloth Diaper Step 1

Step 1. Place the diaper on a flat surface

Place the clean diaper on a changing table, table, or other flat surface. It should be upright and facing you.

Step 2. Fold the left side in half

Take 1/3 of the left side of the diaper and fold it in half. This fold doesn't have to be perfect, but at least try to keep the material straight.

This part of the process is easier if you are using a ready-made cloth diaper

Step 3. Fold the right side over the left

Take the 1/3 of the right side of the cloth diaper and place it on top of the left one (which is now in the middle). Then adjust the material.

Step 4. Place the diaper inside a cover

The folding technique of this method is ideal for you to keep the diaper inside a cover. Then just dress your baby normally!

Buy diaper covers at any baby supply store

Method 2 of 4: Folding the diaper into a triangle

Fold a Cloth Diaper Step 5

Step 1. Fold the diaper diagonally to form a triangle

Place the open, clean diaper on a clean surface. Then take one of the corners and bend it to the other, on the opposite side, to form a triangle.

If the diaper is rectangular in shape, fold it into a triangle shape from the longer side

Fold a Cloth Diaper Step 6

Step 2. Place the baby on top of the triangle

With the cloth diaper in an inverted triangle position, place the baby on top of it until his back lines up with the longer side of the material.

Step 3. Fold the bottom edge of the triangle up

Take the end of the triangle that is facing down and tuck it between the legs and over the baby's belly. Hold it lightly against his skin.

The cloth diaper has to cover the back of the baby's legs

Step 4. Fold the left and right sides in half and secure the diaper

Take the left side of the diaper and fold it to the middle of the baby's belly (where the bottom edge of the triangle is). Then do the same thing with the right side. Pass a pin through the top two layers, being careful not to go through the bottom - or you could skewer the child. If you prefer, use clips made specifically for diapers.

Also be careful when removing the diaper pin

Method 3 of 4: Creating a Kind of Envelope

Fold a Cloth Diaper Step 9

Step 1. Place the diaper on a flat surface

Open the cloth diaper on top of a changing table or other flat surface. It should be upright and facing you.

The technique of this method is great to prevent the leakage of liquids from the diaper

Step 2. Roll the bottom corners to the middle of the diaper

Roll up the lower left and right corners of the diaper until you reach the middle. You'll create a kind of "V".

For now, leave the top two corners as they are

Fold a Cloth Diaper Step 11

Step 3. Place the baby on top of the diaper

Place the baby on top of the diaper so that the baby's lower back is in line with the cloth. Meanwhile, the left and right corners should remain curled.

Fold a Cloth Diaper Step 12

Step 4. Pass the base of the diaper between the baby's legs

Fold the base of the "V" towards the baby's belly, passing between the legs. Hold the material with one hand.

Don't let the corners of the diaper unroll

Step 5. Fold the left and right sides in half and secure the diaper

Wrap the left side of the diaper around the baby's waist until the baby is on top of the middle. Then repeat the process on the right side. Close the cloth with a safety pin or some diaper-specific fasteners.

Pull the sides of the diaper tight, or it won't be as secure

Method 4 of 4: Creating the Shape of an Hourglass

Fold a Cloth Diaper Step 14

Step 1. Place the diaper on a flat surface

Place the clean diaper on a changing table, table, or other flat surface. It should be upright and facing you.

Step 2. Rotate the diaper 180° in the middle

Hold the diaper on both sides and turn the left one from the bottom to the top until it is shaped like a bow tie. Then turn it upright.

The fold has to be right in the middle of the diaper

Step 3. Place the baby on top of the diaper

Place the baby on top of the diaper so that the middle fold is between his legs and the top edge is in the back area.

Step 4. Fold the bottom, left and right sides over the baby's belly

First, take the underside and go through the legs and over the tummy. Then put the left side over the previous one and the right side over the left.

Pull the sides of the diaper tight, or it will loosen up

Step 5. Close the diaper with specific pins or fasteners

Put a safety pin on each side of the diaper, being careful not to pierce the baby's skin. If you prefer, use fasteners made specifically for cloth diapers. In this case, place one on the left, one on the right, and one in the middle.

If you're using safety pins, put your finger under the diaper when you skewer the cloth so you don't hurt the baby

Notices

Popular by topic