How to Make a Hooded Sweatshirt (with Images)

Table of contents:

How to Make a Hooded Sweatshirt (with Images)
How to Make a Hooded Sweatshirt (with Images)

Video: How to Make a Hooded Sweatshirt (with Images)

Video: How to Make a Hooded Sweatshirt (with Images)
Video: How to make glue at home with flour/Easy Homemade glue/ All purpose flour glue/100% working 2024, March
Anonim

Sewing a hooded sweatshirt may seem like a daunting project, but it's easier than you think. You will need to have some specific materials and tools to make the jacket, such as an old sweatshirt to use as a guide, fabric, and a sewing machine, as well as basic sewing skills. Any fabric can be used to make your sweatshirt, and you can customize the garment to your style and needs.

Steps

Part 1 of 4: Cutting the Fabric Pieces

Make a Hoodie Step 1
Make a Hoodie Step 1

Step 1. Choose the fabric

Not all types of material will work to make this project, so it's important to choose your fabric carefully. You can use a heavy or a light one, depending on how hot you want the piece to be.

  • For example, you can choose fleece or thick cotton with stretch (the most common material for sweaters) for a warmer option, or a mesh or t-shirt material to make a light blouse.
  • Buy more material than you think you'll need. 1.8 m should be enough for an adult size piece.
Image
Image

Step 2. Wear an old hooded sweatshirt to cut out the body parts

You don't need a pattern to make a hooded coat, you can use a piece you already have as a guide. Lay the finished sweatshirt over the folded fabric to make two layers, fold the sleeves and hood inwards to have just the body of the garment around it, and draw a 3 cm line around it to allow space for sewing.

  • Choose a hooded sweatshirt that looks like the one you want to create to ensure you get the right measurements.
  • If you find it difficult to work around the hood and sleeves, use a t-shirt as a guide. However, you still need the sweatshirt to use as a guide for the other parts of the project.
Make a Hoodie Step 3
Make a Hoodie Step 3

Step 3. Trace the sweatshirt sleeves to create new ones

Unfold one of the sleeves of the finished garment, and align the top of the sleeve with the folded edge of the fabric and the armpit portion with the other edge of the fabric. Then, use chalk to trace 3 cm from the end of the sleeve and wrist area to have adequate sewing space, and cut along the traced lines.

  • Do not cut the folded edge; leave it intact.
  • Repeat this process one more time to create the other sleeve.
Image
Image

Step 4. Follow the outline of the hood to create the new one

Fold the fabric one more time to make it four layers and arrange the hood so the edges are aligned and it is on its side. Extend the sweatshirt hood over the pile of fabric, but don't worry about lining up with the fold. Trace the shape of the hood onto the top layer of fabric using chalk, then cut the four layers along the line drawn.

Image
Image

Step 5. Cut two straps for the cuffs

With the fabric folded in two layers, open one of the sleeves, line the edge with the folded fabric, and trace around the outer edges of the sleeve wrist. Extend the lines at the end of the sleeve so that the strap is about 4 inches wide and cut along the edges to create two cuffs.

Handles are optional. If you don't want to do them, you can skip this step and just hem the ends of the sleeves

Image
Image

Step 6. Make a long strip for the bottom of the sweatshirt

Keep the fabric folded in two layers and cut a strip that is 4 inches wide and the full length of the bottom of the body of your garment. To find this measurement, measure the underside of one of the body parts and multiply by two.

  • For example, if the bottom of one of the pieces is 50 cm, you will need to cut a strip that is 1 m long.
  • This range is optional. If you don't want to, you can skip this Step and hem the bottom of the sweatshirt.
Image
Image

Step 7. Create the pocket piece

This part is rectangular in shape with curves at the top two corners. You can use a ready-made sweatshirt pocket to trace the shape or create it freehand. The pocket can be as large as you like.

The pocket is also optional. If you don't want to add one, skip this step

Part 2 of 4: Sewing the sweatshirt pieces

Image
Image

Step 1. Secure the body parts with the wrong sides outward

Align the edges of the body parts with the right sides facing each other and place pins on the sides and shoulders. Leave the armpit, neck and lower edge open. Then, sew the stuck areas about 1.5 cm from the edges, removing the pins as you sew.

Image
Image

Step 2. Sew the bottom edges of the sleeves

Then take one of the sleeve pieces and line it up with the long edge so that the right sides are facing each other. Secure the edge leaving the armpit and wrist open and sew the attached edge about 1.5 cm from the cut part of the fabric.

  • Repeat the same process on the other sleeve.
  • Remove pins while sewing.
Image
Image

Step 3. Attach and sew the hood lining and outer parts

Take two pieces of hood fabric and pin the curved edges together, leaving the front and bottom edges open. The right sides of the fabric should line up. Then repeat the same process with the other two pieces and sew about 1.5 cm from the cut edges of the fabric.

Image
Image

Step 4. Attach the hood pieces

Turn one of the pieces right side out and place inside the other piece. Align the outer edges of the hood (the parts that will be around the face) and secure them. Don't worry about pinching the bottom edges of the pieces. Then sew about 1.5 cm from the cut edges of the fabric where you put the pins.

  • Remove pins as you sew.
  • Once you have assembled the hood, turn the end piece so that the right sides face out. The seams must be hidden.
Image
Image

Step 5. Sew the narrow ends of the wrist and base pieces of the body

Now you should sew the narrow edges of the cuff bands and lower body. Align the short edges of each piece with the right sides facing each other and sew about 1.5 cm from the edges.

  • After sewing, you can turn them right side out.
  • Remember, you can skip this step if you're not adding these pieces to your sweatshirt.
Image
Image

Step 6. Hem the pocket

Straight edges should be easy, but you can make a cut in the center of the curved edges to make sewing them easier. Fold about 1.5 cm of fabric around the edges of the pocket piece with the wrong side in and the cut edge hidden. Use pins to hold the fabric in place and sew the edges by taking out the pins while sewing.

If you're not going to include a pocket, you can skip this step

Part 3 of 4: Assembling the sweatshirt

Image
Image

Step 1. Attach and sew the sleeves to the body of the garment

Align the edges of the sleeves with the armhole of the longest piece so that the right sides of both pieces are facing each other, secure with pins and sew 1.5 cm from the edges.

  • Remove pins as you sew.
  • Sewing around armholes can be a little tricky. Start at the top of the shoulder, work down to the armpit, then start at the shoulder on the other side of the armhole and sew down again.
Image
Image

Step 2. Attach the hood to the body piece

Now, you'll have to attach the hood to the rest of the sweatshirt. To do this, line up the bottom edge of the hood with the neck line leaving the cut edges and the right sides of both pieces lined up, pinch the parts together and sew about 1.5 cm from the edges.

The hood piece must fit in the neckline. You may have to stack the piece a bit for this. To ensure the hood is even, secure the edges with the front parts of the hood centered on the front of the body piece

Make a Hoodie Step 16
Make a Hoodie Step 16

Step 3. Attach and sew the pocket to the front of the sweatshirt body

To attach the pocket, fasten it to the front of the larger piece, centered at the bottom of the pocket. The body piece should be right side out and the pocket too. Clip on the straight edges of the pocket and leave the curved ones open, then sew the pocket to the front of the sweatshirt following the attached edges.

  • Remember to sew the pocket only on the top layer of fabric.
  • You can skip this step if you don't want to include a pocket.
Image
Image

Step 4. Align the cut edges of the cuffs with the ends of the sleeves

To attach the cuffs to the ends of the sleeves, fold the wrist pieces in half widthwise with the wrong sides facing each other and the cut edges aligned, then secure the edges of the cuffs to the edges of the sleeves and sew to 1.5 cm from the end of the fabric.

  • Remove pins while sewing.
  • You can skip this step and only hem the sleeves if you don't want to make cuffs. To hem the sleeves, fold about 1.5 cm of fabric inward and sew to secure edges.
Image
Image

Step 5. Add the strip from the bottom of the sweatshirt body

Fold the band widthwise with the wrong sides inward and the cut edges aligned, attach to the bottom of the body piece with the cut edges aligned, and sew 1.5 cm from the edges.

You can skip this step and hem it if you don't want to include this strip

Part 4 of 4: Adding a zipper

Make a Hoodie Step 19
Make a Hoodie Step 19

Step 1. Make a cut in the center of the sweatshirt

Adding a zipper is optional, but you can do this if you like. Choose a zipper long enough to cover the entire length of the sweatshirt. For example, if the body part is 75 cm long, buy a 75 cm zipper. To make room for the zipper, make a cut from the center of the neckline to the end of the jacket body, making sure the line is straight and even.

  • Zippers come in many different lengths, so it shouldn't be hard to find the right length for your sweatshirt. However, if you can't find one the exact size, get one that is as close to the measurement as possible without being longer than the sweatshirt.
  • If you have added a pocket, you can cut through it. You will sew the zipper to both sides and create two pockets.
Image
Image

Step 2. Attach the zipper to the right sides of the fabric

Unzip the zipper and secure each part in place. The fabric edges of the zipper should line up with the cut edges of the body part. Do this on both sides of the sweatshirt opening.

Image
Image

Step 3. Sew the zipper in place

Stitch straight about 1.5 cm from the edges of the zipper and sweatshirt, removing the pins while sewing.

Recommended: