How to Make a Trucker Knot: 10 Steps (with Pictures)

Table of contents:

How to Make a Trucker Knot: 10 Steps (with Pictures)
How to Make a Trucker Knot: 10 Steps (with Pictures)
Anonim

A trucker's knot - or carioca knot - is a very efficient knot for tying heavy loads. It is made up of three parts for maximum strength and utility: a loop, a grip and two latches. Theoretically, it provides a threefold mechanical advantage when squeezed; however, in reality, this advantage is usually less due to friction.

Steps

Method 1 of 2: Tying a Classic Trucker Knot

Tie a Trucker's Hitch Step 1

Step 1. Tie the rope at one end

You might want to attach one end of your rope to something strong, like a hook on your truck body, a fixed bar, or something like that. You'll use the free end of your rope to create the trucker's knot, which is based on a slip knot.

Tie a Trucker's Hitch Step 2

Step 2. Make a loop

Make a loop with your rope and hold that loop at the point where the rope crosses itself. You can do this easily by squeezing the cross section with your index finger and thumb. This movement of threading the rope through itself to create a loop is called the faithful turn. Then, with your free hand, thread a bit of rope across the loop to loop around the trusty.

  • You can make a trucker knot that is better suited for extreme loads by doing several crosses with your first loop instead of just one. This can easily be done by turning the loop several times.
  • You must thread the rope through the first loop enough to create a second loop that comes out of the first. This will only require a few inches of rope.
Tie a Trucker's Hitch Step 3

Step 3. Secure your first bow

You can do this by pulling the rope along the side of the second loop and heading towards the anchor point and the portion of the rope that is passing through the first loop. This should tighten your rope and the first loop around the second loop so that you no longer have to grip it with your fingers.

At this point, you should only have one loop on your rope. This loop should stand out from the first loop just tightened. This is the part of the slip knot in the trucker knot

Tie a Trucker's Hitch Step 4

Step 4. Attach the free end of your rope

You can do this by wrapping the end of your rope around a fixed object, such as a hook, stake, or fixed pillar. Whatever your attachment point, it should be strong enough to support whatever you're holding with the rope.

Pull the rope firmly to tighten the knot and stretch the rope well between the first and second attachment points. Too much slack in the rope can cause your load to slip or move

Tie a Trucker's Hitch Step 5

Step 5. Pass the free end of the rope through the other loop

Thread the free end through the loop until there is no more slack in the string. This will also serve to tighten and strengthen your trucker knot.

Tie a Trucker's Hitch Step 6

Step 6. Finish the knot with two pegs of about 1 cm

Wrap the free end around the two fixed knots of the rope. Since you passed the end through the tie point and brought it back into the knot to finish tying, your knotted rope will have two portions. After passing the free end around both portions, do the following:

  • Keep the free end loose so that the loop is formed by wrapping it around the fixed-knot portions. Pass the free end through the loop and pull firmly; then slide it to the base of the head node. This is the first lock.
  • Then do the same movement after the point where you tied the first lock. This time, when passing the free end through the loop, pull it so that it comes out from under the two latches.
  • Tighten the knot securely. This type of knot is ideal for moderate tension. Now enjoy your trucker knot!

Method 2 of 2: Varying the trucker knot with catau knot

Tie a Trucker's Hitch Step 7

Step 1. Make two turns of the string on the string

To form a faithful loop, wrap the free end of the string around itself so that it continues outside the end already attached, forming a loop. Do this twice and leave some rope left over in each loop so that both are big enough for the rope to go through.

Tie a Trucker's Hitch Step 8

Step 2. Thread some string through the loops and tighten

Take a few inches of your rope after the loops and thread it through both loops. Leave enough string after the second loop so that after tightening the string there are loops both above and below the knots.

Tie a Trucker's Hitch Step 9

Step 3. Attach the free end of your rope and thread it through the loop

Just as you would an ordinary trucker's knot, wrap your rope around the tie-down point and bring it back to the free end part of the knot. Thread the rope through the loop and pull it firmly.

This modified version of the trucker knot is ideal for light to moderate stresses, but is unsuitable for extreme stress. Choose a different knot for heavier loads

Tie a Trucker's Hitch Step 10

Step 4. Tighten the end of the rope and its trucker knot with two barbs

Just as you would with a normal trucker knot, you can create simple locks in the free end part of the knot. Wrap the free end around the double part of the rope at the base of the knot, then do the following:

  • Leave enough slack in the rope to form a loop. Pass the free end through the loop and pull it firmly, sliding the latch to reach the base of the knot.
  • Repeat this process, passing the rope through the loop so that it comes out between the latches. Keep your second latch tight and slide it in until it's close to the first. Your modified trucker knot is ready to use!

Tips

Popular by topic