3 Ways to Clean Wooden Doors

Table of contents:

3 Ways to Clean Wooden Doors
3 Ways to Clean Wooden Doors

Video: 3 Ways to Clean Wooden Doors

Video: 3 Ways to Clean Wooden Doors
Video: How to Use a Multimeter for Beginners - How to Measure Voltage, Resistance, Continuity and Amps 2024, March
Anonim

Doors separating rooms in a house are usually made of wood. To keep the material preserved and looking beautiful, it is necessary to do some maintenance, such as: removing dust and cleaning with neutral detergent regularly. In some cases, however, it may be necessary to consider restoring the painting of the object.

Steps

Method 1 of 3: Cleaning Small Dirt

Clean Wood Doors Step 1
Clean Wood Doors Step 1

Step 1. Remove debris

Over the days, the doors are often covered with dust and cobwebs, especially those that are in corners and outdoors. Therefore, periodically clean with a duster to prevent these impurities from accumulating.

  • In addition to keeping the wood well cared for, cleaning it once a week prevents the formation of stains on the surface.
  • Pay special attention to the outer doors. Thus, insects will not be able to build nests near the entrance to your house.
Clean Wood Doors Step 2
Clean Wood Doors Step 2

Step 2. Mix neutral detergent and warm water

Then dip a non-abrasive sponge into the solution and wipe the surface of the door.

When finished, remove suds and excess soap with warm water

Clean Wood Doors Step 3
Clean Wood Doors Step 3

Step 3. Open the door and clean all edges

To do this, dampen a clean cloth and rinse it as necessary, especially if there is a lot of dust accumulated.

You can use a little mild detergent to remove the most impregnated dirt. Remember, however, to rinse off soap residue

Method 2 of 3: Cleaning Persistent Spots

Clean Wood Doors Step 4
Clean Wood Doors Step 4

Step 1. Clean the door with solvent

Use a small amount of the solution to dampen a clean cloth, then rub it over the surface following the wood grain. That way you will probably be able to remove any dirt buildup.

The most used solvent is known as thinner. You can find it at stores that specialize in cleaning products

Clean Wood Doors Step 5
Clean Wood Doors Step 5

Step 2. Apply a furniture polish

Spray a small amount on the surface of the door and use a clean cloth to spread the product. In addition to restoring the wood's natural shine, possible stains can be removed.

The use of the polish is very important, especially after applying the solvent

Clean Wood Doors Step 6
Clean Wood Doors Step 6

Step 3. Use a steam cleaning machine

Add a small amount of soap to the brush bristles and rub it over the stains. The method in question must be able to clean the entire surface.

  • When finished, remove excess soap with a clean cloth.
  • It is possible to hire steam cleaners from laundries.
Clean Wood Doors Step 7
Clean Wood Doors Step 7

Step 4. Remove discolored paint and varnish

There are a few ways to repaint doors with an antique finish. You can sand the existing varnish. The process, however, is considerably time-consuming. It is also possible to remove paint layers with specific chemicals.

  • Both options are effective. However, when opting for the remover, choose a well-ventilated location, take the necessary precautions and wear protective equipment.
  • There are several liquid, pasty and washable removers. After application, wait for the chemical compound to dry before removing it, regardless of which product is chosen. Afterwards, remove the excess according to the instructions on the package.
  • The methods presented above are workable mainly for external doors.

Method 3 of 3: Preserving Wood

Clean Wood Doors Step 8
Clean Wood Doors Step 8

Step 1. Allow the doors to dry completely after cleaning them with water or other cleaning products

Otherwise, moisture can cause the wood to become deformed or stained over time.

Remove excess moisture with a clean towel. You can also leave a fan running towards the door

Clean Wood Doors Step 9
Clean Wood Doors Step 9

Step 2. Repaint the ports periodically

In addition to making cleaning easier, the ink serves as a film that protects the material. Before painting or finishing, clean the entire surface of the object. Choose a specific product for wood and a color that matches your home decor. It may be necessary to remove the old dye with sandpaper. After varnishing, allow the door to dry completely before using it again.

Remember to cover all the details with duct tape so you don't get them dirty

Clean Wood Doors Step 10
Clean Wood Doors Step 10

Step 3. Sanitize the other door accessories

Use a common cleaner to sanitize doorknobs and locks on both sides.

Recommended: