5 Ways to Remove Drawers

Table of contents:

5 Ways to Remove Drawers
5 Ways to Remove Drawers
Anonim

It may be that at some point you find a reason to take the drawers out of a closet, a dresser or other similar furniture. The process is usually simple, but varies depending on the type of drawer you're dealing with.

Steps

Method 1 of 5: Drawers with Wheels

Remove Drawers Step 1

Step 1. Work from the top down

If you want to remove more than one drawer from the furniture, start with the top and take them out one at a time until you reach the last.

This way, you prevent the furniture from getting heavy on the top and falling while you are working. If the furniture itself is stuck or is much heavier than the drawers, this danger does not exist and the order of removal will not matter

Remove Drawers Step 2

Step 2. Pull the drawer up to the locking mechanism

Pull it as far as it will open without resistance. Most drawers come to a natural stopping point.

Stand in front of the piece of furniture and place one hand on each side of the drawer. Leave a little space between you and her to be able to extend it

Remove Drawers Step 3

Step 3. Tilt the drawer

Tilt her front down, gently lifting her back in the process. You will feel the wheels or the bottom of the drawer coming off the rails.

It may be necessary to give a light but firm tug or rock the drawer forward to help free the casters from the rail. But don't overdo it, or you could damage the drawer or the hardware

Remove Drawers Step 4

Step 4. Pull it out

Continue pulling the drawer out. Now that the casters have passed the locking mechanism, you can take the drawer out of the furniture.

Method 2 of 5: Wooden Rail Drawers

Remove Drawers Step 5

Step 1. Work from the top down

It's easy to handle single-drawer furniture, but if you need to take out several, it's best to start with the top and work your way down to the last.

This way, you prevent the furniture from getting heavy on the top and falling down. But if the furniture itself is heavier than the drawers, the order of removal won't make much difference

Remove Drawers Step 6

Step 2. Open the drawer

Extend it to the maximum. Most of them naturally stop at some point.

  • Stand in front of the drawer and place one hand on either side of the front of the drawer.
  • Keep some distance so the piece has enough room to come out when you pull. If necessary, take a step back.
Remove Drawers Step 7

Step 3. Pull the drawer out hard

Continue pulling the drawer toward your torso as straight as you can. It will eventually come out, but you might need to use a good deal of strength for that.

  • The resistance offered by the drawer varies depending on how it was constructed. Those that use a wooden center rail are more difficult to remove than those that have two side rails.
  • Each one of them has a plastic lock, and she is responsible for preventing the drawer from falling by accident. The latch on center rail drawers is generally somewhat stiffer, which makes these parts more difficult to remove. On the other hand, the latch on side rail drawers is often somewhat flexible, making removal easier.

Method 3 of 5: Drawers with Metal Rail and Lever

Remove Drawers Step 8

Step 1. Focus on the top drawer

When you need to remove more than one drawer from a piece of furniture, it is best to start with the top. Go down slowly, leaving the bottom drawer last.

The order of removal is only important if the drawers are heavier than the furniture body. In these cases, the furniture can be heavy on the top if you start at the bottom, and you risk falling over. Working from the top down avoids this problem

Remove Drawers Step 9

Step 2. Open the drawer

Extend it as far as possible. Stop only when the drawer has reached its natural stopping point.

  • Stand in front of the furniture to remove drawers. Place one hand on each side of the drawer, keeping your hands close to the drawer's face and out of the way of the metal rails.
  • Leave a little space between your trunk and the drawer so that the drawer can open as wide as possible without hindrance.
Remove Drawers Step 10

Step 3. Find the rail levers

You should see a lever in the center of each metal rail. It can be straight or curved.

Full-extension rails, most common on 12-inch (10.5 cm) drawers, typically have straight levers. The three-quarter-length ones, more common in 15.25 cm drawers, have curved levers

Remove Drawers Step 11

Step 4. Press the levers

Use your left hand to press the lever on this side, and your right hand to press the lever on the other side at the same time.

  • If the levers are straight, just raise or lower them as much as possible.
  • If they are curved, raise or lower until the curve stretches. To do this, you will have to press directly on the curved part of the lever.
Remove Drawers Step 12

Step 5. Pull the drawer out

Still holding the levers in the correct positions, continue pulling the drawer out and toward your torso. She should leave.

Generally, the metal rails will continue to protrude from the front of the furniture after you remove the drawer. Carefully push them inward, moving them in a straight, parallel direction before moving any further with the furniture

Method 4 of 5: Drawers with Stabilizer Screws

Remove Drawers Step 13

Step 1. Work in the correct order

As a general rule, you should first remove the top drawer from any furniture. Go down slowly, taking out one drawer after another until you reach the last one, farther down.

Stabilizer screws are often used on drawers that will need to support a lot of weight, which is why it is extremely important to get those drawers out in the right order. Removing the bottom drawers first will cause the furniture to be heavy on top, which can cause it to fall over

Remove Drawers Step 14

Step 2. Pull out the drawer

Extend it as far as possible before it reaches the built-in stop point.

  • Stand in front of the drawer. Leave enough space between it and your body to be able to open it all the way.
  • You will need to pull it by the front handle or by placing your hands on the sides of the drawer face. Keep your fingers away from the metal rails on the side.
Remove Drawers Step 15

Step 3. Remove the stabilizer screws

Find the two screws inside the drawer and remove them using the correct screwdriver.

Note that most drawers of this type use a size eight screw that will have to be removed with a Philips screwdriver

Remove Drawers Step 16

Step 4. Release the tabs

Find the catch and release tabs on the sides of the drawer and push them both down at the same time to release the drawer from the two side rails.

You'll probably have to hold the flap between your thumb and forefinger to move it

Remove Drawers Step 17

Step 5. Pull the drawer out

Keep pulling it, trying to keep it as straight as possible, until it comes off the furniture.

  • Try to steady yourself while removing the drawer. It will likely be heavy, no matter if it's empty or full.
  • Look at the inner right flap of each removed drawer for a number decal. This decal indicates which drawer goes in which compartment, in case you decide to put them back in place. The top drawer is usually number 1.
Remove Drawers Step 18

Step 6. Push the rails inward

Before working further with the furniture, push the center stabilizer rail and the two side rails inward in a straight line.

Method 5 of 5: Fall Arrest Mechanism

Remove Drawers Step 19

Step 1. Work from the top down

When taking several drawers out of a piece of furniture, start at the top and work your way down to the bottom drawer.

Thus, you prevent the furniture from being heavy on the top. If that happened, it would lose its balance and could even fall while you rummage through the remaining drawers

Remove Drawers Step 20

Step 2. Open the drawer

Pull it straight out of the piece of furniture, stopping only when you feel resistance and see that the piece no longer comes out.

  • Stand in front of the furniture. Leave enough space between your body and the drawer for the drawer to open fully.
  • Pull the drawer out by lifting the handle towards you. If necessary, grab her front face from the bottom to help make her come out even more. Keep your fingers away from the metal rails while the drawer is in motion.
Remove Drawers Step 21

Step 3. Release the cable

Find the cable attached to the bottom outside of the drawer and use a screwdriver to remove the screws that hold it in place.

  • This cable is a safety mechanism that prevents more than one drawer from being opened at the same time.
  • In the upper and lower drawers, the cable will be attached to special inserts on the back.
  • In the middle drawers, the cable will be passing through eyelets at the rear center of each drawer and at the bottom of the cabinet.
  • Note that you will need to use a Philips screwdriver to release the cable from the drawers.
Remove Drawers Step 22

Step 4. Squeeze the disconnect tabs

Look towards the bottom of the right and left metal rails. You will find a disconnect tab in the center of each one. Press both tabs down at the same time.

Lower both to the end. On most drawers, these tabs will not lock into place after being pressed, so you will have to continue holding until you remove the entire drawer

Remove Drawers Step 23

Step 5. Pull the drawer out

Keep opening it and tilting it up at the same time. You will be able to remove it from the furniture.

  • Know that the drawer will likely be quite heavy, no matter if it's full or empty. Get ready for it.
  • In many cases, you will have to replace each drawer in the same compartment when reassembling the furniture. Most of these drawers have a decal number to help with the process, and the top drawer is usually number 1.
Remove Drawers Step 24

Step 6. Push the two metal rails back into place

If they are still coming out the front of the furniture after you take the drawer out, push them back into the furniture before working with it further.

Tips

If possible, remove whatever is inside the drawer before lifting it. This will make it lighter and much easier to remove, decreasing the risk of you dropping it

Notices

  • Wear gloves when working with metal drawers to protect your skin from sharp edges.
  • Light to moderate weight drawers can be removed by one person, but if you plan to remove file drawers or other heavy drawers, it is safer to work with at least one other person.

Popular by topic