3 Ways to Cut a Carpet

Table of contents:

3 Ways to Cut a Carpet
3 Ways to Cut a Carpet

Video: 3 Ways to Cut a Carpet

Video: 3 Ways to Cut a Carpet
Video: 3 DIY Ways to Fix a Scratch in Hardwood Floors 2024, March
Anonim

Carpet is a kind of rug used in floor decoration in various types of environments. Typically, the flooring needs to be cut so that the length fits the specific measurements of the room. Although it seems complicated, it is possible to adapt it with the application of some simple techniques. To better understand the process, just follow the instructions and tips presented in this article.

Steps

Method 1 of 3: Cutting the Carpet

Cut Carpet Step 1
Cut Carpet Step 1

Step 1. Choose a sharp object

Carpet edges can be removed with a conventional knife or with an “X-Acto” stylus. Before proceeding, make sure the blade of the chosen tool is sharp enough and sharp enough to trim the fibers from the coating effectively.

  • Replace the blade with a new one if using a tool that has removable parts.
  • You can also purchase or lease an electric carpet cutter to automate and facilitate the adjustment procedure. It is possible to find the equipment in department stores and building materials.
Cut Carpet Step 2
Cut Carpet Step 2

Step 2. Place the blade directly on the carpet

Hold the utensil with your dominant hand and position it on the edge you want to remove. Then lightly press the surface in order to pierce the base of the casing.

  • The adjustment process basically consists of cutting the carpet support that is fixed to the floor.
  • Avoid making deep cuts to avoid damaging the blade or scratching the floor.
Cut Carpet Step 3
Cut Carpet Step 3

Step 3. Drag the blade in the sewing direction after piercing the base of the liner

Use a standard ruler to be able to cut the surface precisely. Reposition the instrument on the carpet as you go along. At this point, the support will start to detach from the floor.

  • Keep your wrist steady to prevent the edge from becoming disproportionate.
  • Use the sewing thread as a reference if a ruler is not available. This way, the cut will be more regular.
Cut Carpet Step 4
Cut Carpet Step 4

Step 4. Replace the blade if necessary

It is likely that the tool edge will become less sharp when adjusting the coating. In this case, the blade can be changed or sharpened again with the help of an emery wheel.

In addition to saving time, you won't have to work harder than necessary

Method 2 of 3: Adjusting the Floor for Installation

Cut Carpet Step 5
Cut Carpet Step 5

Step 1. Calculate the room size

Use a tape measure to find the exact footage of the environment. In addition to determining the amount of carpet needed, you can cut the flooring to the appropriate specifications.

  • Flooring is usually sold by the square meter and for this reason the total floor area must be measured.
  • To do the calculation, just multiply the length by the width.
Cut Carpet Step 6
Cut Carpet Step 6

Step 2. Install the carpet gradually

Cut the liner into smaller pieces for easier handling. Then place each one on the floor, making the necessary adjustments, according to the room's measurements and specifications.

This way, the installation can be carried out more easily

Cut Carpet Step 7
Cut Carpet Step 7

Step 3. Cut the backing of the liner

Before making length adjustments, turn the carpet over and position the blade directly over the base. In addition to providing greater stability, this surface is completely smooth, an aspect that will make your work easier.

  • Mark the exact point where you will make the cut with a pencil or, if you prefer, use the sewing line as a reference.
  • By turning the floor inside out, you'll be able to make the cuts more accurately and still prevent the floor from being damaged.
Cut Carpet Step 8
Cut Carpet Step 8

Step 4. Carefully adjust edges as per room layout

The carpet must fit the contours of the walls, built-in cabinets and other details. Therefore, measure the room to determine the exact coating size. Also, try to place it on the floor before making the cut.

  • Draw the floor plan of the room on a sheet to establish the necessary parameters.
  • If in doubt, consider hiring a specialist.

Method 3 of 3: Removing an Old Flooring

Cut Carpet Step 9
Cut Carpet Step 9

Step 1. Pierce the carpet with the tip of a knife

Position yourself a few meters from the wall, then cut a piece of approximately 4 inches of flooring.

You will need to drill more holes depending on the size and layout of the room

Cut Carpet Step 10
Cut Carpet Step 10

Step 2. Remove the carpet with your hands

Pull the casing through the holes made earlier. Thus, the floor can be cut without the blade damaging the floor surface.

The removal process can be more laborious depending on the type of installation performed. If necessary, remove the adhesive residue from the base with a spatula or similar object

Cut Carpet Step 11
Cut Carpet Step 11

Step 3. Continue taking off the liner

Cut the surface with the blade as you remove the carpet from the floor. When finished, collect all floor residues and place them in a designated place for disposal.

  • At this point, it is not necessary to cut the carpet accurately or gently.
  • Avoid rushing to avoid causing accidents.
Cut Carpet Step 12
Cut Carpet Step 12

Step 4. Loosen carpet edges with a hammer or crowbar

Place the tip of the tool at the junction of the wall and the floor and apply a little force to loosen the ends. Then, pull the liner with your hands until you can completely remove it.

  • Remove the adhesive and loosen the floor with the help of a knife if you cannot pull it out with your hands.
  • After finishing, collect the pieces of carpet and dispose of them properly.
Cut Carpet Step 13
Cut Carpet Step 13

Step 5. Dispose of waste material

Before completing the process, remove the nails and adhesive remnants from the floor with a spatula or pliers. Also, clean the floor to remove accumulated dirt. This way, it will be possible to install new carpet in the room later.

  • Dispose of the old coating in the trash if you are not interested in reusing it in other renovation projects.
  • Clean dust and other debris from the environment with a vacuum cleaner to make it easier.

Tips

  • Measure the room twice to get the correct dimensions.
  • Carpet can be removed more quickly if two people are involved.
  • Wear rubber gloves, goggles, knee pads and a mask to protect yourself.

Notices

  • Handle sharp objects with great care to avoid accidents, especially if the blade is very sharp.
  • You may find it difficult to cut and remove the carpet placed in doorways and the like. In this case, hire a professional experienced in the matter.

Recommended: